Hardwood Refinishing in Portsmouth, VA
Measured, dust-contained restoration for Portsmouth’s historic heart pine and oak in Olde Towne, Port Norfolk and Park View.
A Century of Sanding Means Measuring First
Many floors in Olde Towne and Port Norfolk have already been refinished several times. Each sanding removes a little wood, and an old board sanded too far exposes its nails and tongue. So before we recommend anything, we check board thickness at a vent or threshold. If there is wood to spare, we sand with HEPA-connected equipment that keeps fine dust out of old plaster. If there is not, we will suggest a recoat instead of a sander.
Thickness check first
We measure what is left above the tongue and plan the lightest sanding that does the job.
Neighborhood by neighborhood
Where We Work in Portsmouth
Portsmouth has some of the oldest floors we work on. Each one gets a measured, conservative sanding plan so it has refinishes left for the next owner.
- Olde Towne: Heart pine and oak in 1800s houses, sanded lightly to keep the character and protect the plaster.
- Port Norfolk and Park View: Early-1900s heart pine and oak brought back after years under carpet.
- Churchland: Mid-century oak floors refreshed and restained for a modern look.
Choosing a finish
Pick a finish for your Portsmouth floors.
Portsmouth floors take street grit and rental traffic, so the finish you pick decides how that wear shows and how soon you can walk on it. Tap one to compare.
Bona Traffic HD
Commercial waterborne
- Durability
- Maximum
- Color
- Stays clear for years, so light oak stays light
- Odor
- Very low
- Best for
- Busy homes, pets and rentals
Loba Supra
Ceramic-reinforced waterborne
- Durability
- Maximum
- Color
- Clear, with a hard surface that shrugs off grit
- Odor
- Low
- Best for
- Big dogs, kids and heavy traffic
Extra matte
Low-sheen waterborne
- Durability
- Very good
- Color
- A soft, natural look that hides footprints
- Odor
- Low
- Best for
- Bright rooms and a modern look
Oil-based polyurethane
Traditional
- Durability
- Moderate
- Color
- A classic warm amber that deepens with age
- Odor
- Strong, with a slower cure
- Best for
- Older homes and a traditional look
Portsmouth refinishing FAQ
Our Olde Towne floors have black stains near the radiators. Can they be fixed?
Deep black stains usually mean water damage in the wood itself. Those boards are replaced; lighter stains often sand out.
01Can you refinish without changing the color?
Yes. A natural or clear finish keeps the wood’s own color, and we sample first so there are no surprises.
02Will refinishing fix gaps between old boards?
Seasonal gaps are normal in old homes. Large, permanent gaps can be filled with wood slivers before finishing.
03How long does it take?
Typically two to four days, depending on repairs and the finish chosen.
04Our Olde Towne floor has old paint drips and nail holes. Will those sand out?
Paint drips sand off. Nail holes in old pine are part of the floor; we fill the large ones with a color-matched filler and leave the small ones, which most owners like. We’ll go over it with you before we start.
05Can you refinish a Churchland floor that’s under carpet?
Usually, yes. Many Churchland and Western Branch houses have oak under the carpet. Once the carpet and tack strips are up, we check for stains and thin spots, then sand and finish like any other floor.
Book your free Portsmouth estimate
Rated 5.0 on Google by homeowners across Hampton Roads, from Virginia Beach to the Northern Neck.





